• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

cooling

  1. Scott Purucker

    SX230 Cooling Line Replacement

    My 2008 SX230 has less and less water pressure coming out of the pissers. Has anyone replaced the cooling lines along with the pissers? What did you use? Or is the lack of pressure from something else? I replaced my impeller and housing and still get the same result.
  2. Scottie

    How to install temperature gauges and senders for engine temps

    I wanted a way to monitor the temperature of each engine on my boat (2013 212x, 1.8l HO engines). In stock form, you will get an overheat warning in the multi-function display (tach) when there is a problem, but you will get no warning before that, and you will get no actual temperature reading...
    • Scottie
    • Thread
    • coolant cooling dash gauge how to how-to overheat sender temp temperature
    • Replies: 23
    • Forum: Member Tips and Ideas
  3. J

    ‘14 AR192 intercooler swap / adding cooling line

    So title basically says what I’m after. In short, I’m the owner of a new to me ‘14 Ar192. It was only running about 35mph. I knew it should be faster. I’ve done the research and ordered a SVHO intercooler today on eBay. It was like new. It seems pretty straight forward switching that out. The...
Back
Top