• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.

    Click Here for more information>Ride Steady group buy for JetBoaters.net members only

    You can dismiss this Notice by clicking the "X" in the upper right>>>>>

engine alarm

  1. M

    Scarab 165 from 2018 code foult P1130 and P013F

    Hallo need Help I have a Scarab 165 from 2018 with 51 hours the boat drive great but have some Foult Code and the engine lamp goes on what ist the Problem ? Thanks a lot
  2. D

    Water On / Motor Off!

    I have a 252FSH and I turned on the port motor, then turned on the water. The hose had a kink and was not flowing enough water pressure, so the motor started to overheat (ran for about 5-6 min). I noticed smoke coming out and panicked so I mistakenly turned off the motor before turning off the...
  3. Mikeybagzz94

    Engine Fault Code

    I own a 2013 Yamaha 242 limited S, this year I found two engine codes that I was able to clear by fixing some exhaust issues and replacing an o2 sensor. When I now turn on the boat and check the engine diag via the tachometer all the codes have cleared but now I’m left with a code (Normal Spn...
  4. J

    several issues and questions for my 2016 fsh 190.

    Hi everyone. I just placed my 2016 fsh 190, that had been purchased this past December, in the water a few days ago and had some issues I hope I can be helped with. 1- The steering is a little rough and noisy and after doing some research I believe it is the steering cable. Anyone have...
Back
Top