Welcome to Jetboaters.net!

We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)
Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.

Click Here for more information>Ride Steady group buy for JetBoaters.net members only

You can dismiss this Notice by clicking the "X" in the upper right>>>>>

09 212x - water in front locker and engine bay

Thread starter RXBoost
Start date Oct 2, 2019

suke

Jetboaters Admiral

Oct 4, 2019

RXBoost said:
That's actually what I did last night when we took the boat out to surf. I had no water to bilge out either.... So the ballasts aren't leaking and the scupper isn't either. I must have just been doing something wrong before.

Or did all the water drain into the hull? Did more come out when you pulled the drain plug? The scupper is a ticking time bomb and super cheap to replace. I'd go ahead and swap it out in the off season.