redmango
Active Member
- Messages
- 1
- Reaction score
- 0
- Points
- 30
- Boat Make
- Chaparral
- Year
- 2016
- Boat Model
- VRX
- Boat Length
- 21
Hi, was getting P0524 error code. parked the boat for a while, changed the oil and filter, unplugged the batteries, and still got the code. Pulled the Oil pressure sensor, it had some corrosion on the plate where it mounts/sits on the engine block. Ordered a new one on Amazon, maybe the wrong one, no dealers close by. Put the new one and still have the message and in in limp mode. Took it off, and put a pressure gauge on it. Pressure started around 85 to 90, then down to about 70 running at limp speed. at idle it dropped down to about 40. Looking for next steps, and the correct MPN for the sensor. Thanks
