Welcome to Jetboaters.net!

We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)
Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.

Click Here for more information>Ride Steady group buy for JetBoaters.net members only

You can dismiss this Notice by clicking the "X" in the upper right>>>>>

Floor bolts on SX210

Thread starter Jeff McBee
Start date Aug 25, 2017

Jeff McBee

Active Member

Aug 25, 2017

Suggestion from you "do it yourself" guys out there. Replaced my fuel sender last night in my 2006 Yamaha SX210. Only having this boat for 4 month it was the first time i took the floor up to get to the fuel tank. Out of the 13 bolts that hold the floor down only six were not stripped out. I could literally lift them out with my fingers. Except for one that is stuck for lift. I'm having to drill it completely out. Anyway to fix the stripped out holes in the boats floor???

You must log in or register to reply here.