• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.

    Click Here for more information>Ride Steady group buy for JetBoaters.net members only

    You can dismiss this Notice by clicking the "X" in the upper right>>>>>

Jet Boat Pilot tower wiring harness??

convenience has a price, I would be more curious as to why you would want a connector there instead of a single wire running the entire length? If you had ideas of additional equipment just run a few extra wires.

There have been few posts over the last week about running wires through the tower, you may do a quick search to look at those for ideas,
 
convenience has a price, I would be more curious as to why you would want a connector there instead of a single wire running the entire length? If you had ideas of additional equipment just run a few extra wires.

There have been few posts over the last week about running wires through the tower, you may do a quick search to look at those for ideas,
I definitely want a cleaner look rather than having a speaker wire coming out of a hole. I would much rather have one wire going straight to the source amp. Just trying to see how everyone has done it on here.
 
I bought my tower harness from earmark marine ....
 
Those Neutrix plug ends are expensive but as said already, you are paying for convenience.
 
NEUTRIK NL4FX SPEAKON SPX CABLE CONNECTOR 4P

NEUTRIK NLT4MP-BAG SPEAKON STX 4P MALE CHASSIS CONNECTOR BLK

Ordered online at parts-express.com
 
Back
Top