• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.

    Click Here for more information>Ride Steady group buy for JetBoaters.net members only

    You can dismiss this Notice by clicking the "X" in the upper right>>>>>

New to me: 2000 Sugar Sand Heat - handle replacement?

Mbolzies

Member
Messages
2
Reaction score
0
Points
10
Boat Make
Sugar Sand
Year
2000
Boat Model
Other
Boat Length
14
I just picked up my first jetboat (my other boat is a classic ‘69 repowered glastron) so anything people can share about Sugar Sand boats or jet boats in general, I’d be appreciative.

That said, I’d like to address a small, but cosmetic issue with my purchase- which is the severely discolored and beat up handle pictured below. Anyone know where I can get a replacement (and which handle will work as a replacement?)
 

Attachments

  • 7F3CA3DB-5955-41F1-9274-96126A96A4F9.jpeg
    7F3CA3DB-5955-41F1-9274-96126A96A4F9.jpeg
    5.9 MB · Views: 6
  • C98C85DF-8FFC-470B-AFFF-2549B4D3DA2C.jpeg
    C98C85DF-8FFC-470B-AFFF-2549B4D3DA2C.jpeg
    4.7 MB · Views: 7
  • 9215F618-9E37-4909-928C-23DE91522E5E.jpeg
    9215F618-9E37-4909-928C-23DE91522E5E.jpeg
    116.4 KB · Views: 8
  • 11540722-14F3-4DFA-BB3A-33F4385A1DE5.jpeg
    11540722-14F3-4DFA-BB3A-33F4385A1DE5.jpeg
    140.7 KB · Views: 9
  • 14C59014-84FD-4E72-9D9B-1BE5B924FFFC.png
    14C59014-84FD-4E72-9D9B-1BE5B924FFFC.png
    7.1 MB · Views: 8
It's a generic marine handle. Best bet is to measure the hole locations and order one through West Marine or another marine parts outlet.

You will not find a sugar sand specific handle, and that's fine, as it is very generic.

Good luck.
 
Back
Top