• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.

    Click Here for more information>Ride Steady group buy for JetBoaters.net members only

    You can dismiss this Notice by clicking the "X" in the upper right>>>>>

Nut and washer size

Gerry R

Well-Known Member
Messages
10
Reaction score
14
Points
52
Boat Make
Yamaha
Year
2018
Boat Model
SX195
Boat Length
19
Does anyone know the nut size? My new 252se literally fell out.
 

Attachments

  • IMG_20210518_164711.jpg
    IMG_20210518_164711.jpg
    995.1 KB · Views: 4
  • 16213712499757942392535051133427.jpg
    16213712499757942392535051133427.jpg
    572.9 KB · Views: 3
I would take the other one off and go to the hardware store to match it up. Just make sure it's SS and use blue loc-tite when reinstalling
 
Back
Top