• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.

    Click Here for more information>Ride Steady group buy for JetBoaters.net members only

    You can dismiss this Notice by clicking the "X" in the upper right>>>>>

Pics of seats removed 20008ish boats?

Speedling

Jetboaters Admiral
Messages
5,182
Reaction score
4,426
Points
432
Location
Cedar Lake, IN
Boat Make
Yamaha
Year
2008
Boat Model
SS
Boat Length
21
I am redoing all the seats. Got skins from hugo which are looking good. Can't figure out removal of certain ones and hope you guys can help! All the base ones i got figured out but the seat backs i Can't tell if they have clips or what! I got the center midddle aft but the aft seat backs on sides i can't get to slide up and don't want to force it if that's not how they go! Found 1 screw at bottom.
Any pics would be a life saver!
 
I assumed they would all slide up like the middle back but i can't break it loose!20230520_150321.jpg20230520_150317.jpg
 
Yea, there are bolts (nuts) on the back side... a real pain to get to. You need a contortionist to get to them (I've done it). You have to climb in to the hatch to get to them, and there is enough room.. I was in there doing my fresh water shower install.
 
Yea, there are bolts (nuts) on the back side... a real pain to get to. You need a contortionist to get to them (I've done it). You have to climb in to the hatch to get to them, and there is enough room.. I was in there doing my fresh water shower install.
Thanks! Looks like no rain this week so i may just uncover and dig in hard!
 
No problem. I'm an expert with the bow cushions... I had an incident first few months after we bought the boat and I had to have all the back cushions recovered by a local upholstery guy. I was very impressed by his work. I am sure that the back cushions are attached the same (a lot of cant see, have to feel) , but if you need any help, just shout.
 
Back
Top