Welcome to Jetboaters.net!

We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)
Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.

Click Here for more information>Ride Steady group buy for JetBoaters.net members only

You can dismiss this Notice by clicking the "X" in the upper right>>>>>

Electronics-Stereo/GPS/Chartplotter/Electrical etc

Replacing Both Tacs on 2003 LLX210

Thread starter joe coleman
Start date May 13, 2021

joe coleman

Jet Boat Addict

May 13, 2021

I'm replacing both tacs on my 2003 LX210.

From previous notes on this and other forums, I have purchased both
GM Delphi / Packard - 4 Way Metripack 150.2 Connector Plug Pigtail for IAC & MAP

and

Faria Boat Tachometer Gauge THC052B | W/ Hour Meter 3 1/4 Inch GLS Stock: 1042220

HOWEVER, now I'm lost.

Looks like each tac has three wires coming out of the back but the new ones have two locations for four wires each. No wait - one of the connectors does not have wires coming out of it - only the plug.
Anyway - I'm confused. Three on the original and four on the new.

Can someone help?

Thanks

You must log in or register to reply here.