• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.

    Click Here for more information>Ride Steady group buy for JetBoaters.net members only

    You can dismiss this Notice by clicking the "X" in the upper right>>>>>

SX190 Check Engine Light

So, I found out where the part goes and replaced it. Disconnected battery for 10 minutes Check engine still comes on :( . Any ideas? Also how do I pull up what engine code it is, I want to make sure its still the same code as before. TIA

Did you ever resolve this?
 
Aloha,

Just chiming in here. I replaced my O2 sensor (post cat) with an OEM Yamaha part (thanks to the good people here who clued me in to the code and then H2O Marine San Diego, Brett and my YES warranty for the new unit.) AND the Check Engine icon went away after after a few stop/starts and battery disconnects....BUT it returned again a few outings later....BUT it went away again...but as of 2 weeks ago it returned. When navigating thru the Gauge to Engine Diagnostics, it comes up "(Normal SPN)" or something to that effect.
FYI 2017 SX190 CA model.
 
Aloha,

Just chiming in here. I replaced my O2 sensor (post cat) with an OEM Yamaha part (thanks to the good people here who clued me in to the code and then H2O Marine San Diego, Brett and my YES warranty for the new unit.) AND the Check Engine icon went away after after a few stop/starts and battery disconnects....BUT it returned again a few outings later....BUT it went away again...but as of 2 weeks ago it returned. When navigating thru the Gauge to Engine Diagnostics, it comes up "(Normal SPN)" or something to that effect.
FYI 2017 SX190 CA model.


Did you ever rectify the issue?
 
Unfortunately "no". The replacement of the most recent bad O2 sensor again failed. Since then I've been running the boat with the "check engine" light on. I am in the process of trying one more time with a "hack" that I've seen on YT which involves purchasing spark plug "non-foulers" and using them to increase the space between the sensor tip and the exhaust flow. The non-foulers create their own space for the sensor to sit in and it's up out of the way of the direct exhaust path. It appears to work on cars.
 
Back
Top