Forum News! New Trophy for cutting a hole in your boat!

[F.M.]

I cut a hole for a 2nd 10" subwoofer beside the captain's chair, right under the throttles. I don't know how I don't have photos of it, but I don't.
*Edit* Found a photo! Not a picture of the subwoofer but the it's in the background.


And I don't know of it counts but I cut a rather large chunk out of the opening of the anchor locker to be able to fit a Richter anchor in there.
Anchor Locker Mod

 

[Brad_Ct]

Added a second bilge pump and float switch because boat will be on a lift and I didn’t want to drain the battery with the stock pump.

 

[Seadeals]

This was the biggest. I still have the part I cut out. I don’t know why but I just couldn’t convince myself to throw it out.

 

[F.M.]

At current boat prices that piece is probably worth about $150.

 

[84rzv500r]

This was the biggest. I still have the part I cut out. I don’t know why but I just couldn’t convince myself to throw it out.
View attachment 191782View attachment 191783

its ok I keep all of my cutouts... you may change your mind and West Marine Six10 is your friend in that case...

 

[Brad_Ct]

This should qualify me, had to cut the deck up to repair the damage done by the dreaded unsealed tabled support.

 

[xtreme96gs]

How about a 2023 with 0.4 hours on it (just the test drive when picking up new)
- 6 holes in the bow for cleat and rod holder grill mount
- 2” hole waterproof receptacle for the charger
- 3” hole in dash for new radio location
- 3” hole in swim platform for secondary screen
- 4 1/4” holes for swim platform table mount
- 16 5/8” holes for RGB accent lights.
Still planning on 4 3/4” holes for phender pro flush mounts, and another hole in the dash for a simrad after relocating connext screen

 

[jthackman]

How about a 2023 with 0.4 hours on it (just the test drive when picking up new)
- 6 holes in the bow for cleat and rod holder grill mount
- 2” hole waterproof receptacle for the charger
- 3” hole in dash for new radio location
- 3” hole in swim platform for secondary screen
- 4 1/4” holes for swim platform table mount
- 16 5/8” holes for RGB accent lights.
Still planning on 4 3/4” holes for phender pro flush mounts, and another hole in the dash for a simrad after relocating connext screen

very fun..
can you share the accent light you're using?

 

[kgower]

very fun..
can you share the accent light you're using?

very fun..
can you share the accent light you're using?

Have the same question.