• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Announcing the 2024 Jetboat Pilot 10th Annual Marine Mat Group Buy for JetBoaters.net members only! This is your best time to buy Marine Mat from JetboatPilot - you won't get a better price - 30% Off! Use Coupon Code JETBOATERS.NET at checkout.

    So if you are tired of stepping on really hot snaps/carpet, or tired of that musty carpet smell - Marine Mat is the best alternative out there! Get in on this now, or pay more later!

    You only have until September 30th to get in on this.....So Hurry!

    You can dismiss this notice by clicking on the "X" in the upper right corner>>>>>>>>

GTS 187 impeller and wear ring parts numbers??????

Kyle Mekulik

Kyle Mekulik

Jet Boat Addict
Messages
57
Reaction score
21
Points
102
Location
Newburgh New York
Boat Make
Glastron
Year
2015
Boat Model
GTS
Boat Length
18
Does anyone know of the part numbers for the impeller and wear ring for a 2015 GTS 187 with the 250hp sucked up something hard and it dinged the impeller..
 
Hey Kyle.

I have the GTS 207 with the supercharged 250 hp. I was on lake other day and lost all propulsion. Had to get towed. Boat runs with a loud whine and if I rev in fwd or reverse I get no movement. On trailer hooked to hose no loud whine. Back on water nothing. None of the seadoo dealerships will touch my boat even thought it’s same motor so I’m stuck making appt with glastron dealer 1 1/2 hours away who is booked up for 3 weeks. I too would like to know a seadoo model I could give to local seadoo dealer to see if they have wear ring in stock. I think that may be my problem. Do i have to buy from dealer one of those impeller removal tools also?
 
I’m working on all the info tomorrow Monday going to contact a reputable marine dealer that sells Glastrons so I can get more info and what MM spline tool I need on top of all the parts numbers
 
I took my jet pump off from the back. My impeller shaft is stripped. Don’t do 360s in reverse. I think that’s how I did it. 70 hours on boat. When I look up parts on eBay the description only says what seadoo jet boat models or what seadoo jet skis the parts are for, not our boats. And I called local seadoo dealer and told them I have Rotax 1503 4tec and they said we can’t look up parts that way, we neee a seadoo model to cross reference. So Frustrating. I even have the 1503 service manual that I bought online. It shows all parts for different repairs but doesn’t give part numbers. lol. I don’t have a Glastron dealer around me. I bought boat used out of state.
 
Last edited:
Ok guys got parts numbers for the 250hp Rotax single engine boat powered by BRP

Wear ring 0460160
Impeller 0460166
This supposedly only applies to 18-21ft boats
 
Last edited:
I was able to get ahold of someone at recboat holdings @ this number make sure you have your hull ID

(231) 775-1351
 
Samson said:
I took my jet pump off from the back. My impeller shaft is stripped. Don’t do 360s in reverse. I think that’s how I did it. 70 hours on boat. When I look up parts on eBay the description only says what seadoo jet boat models or what seadoo jet skis the parts are for, not our boats. And I called local seadoo dealer and told them I have Rotax 1503 4tec and they said we can’t look up parts that way, we neee a seadoo model to cross reference. So Frustrating. I even have the 1503 service manual that I bought online. It shows all parts for different repairs but doesn’t give part numbers. lol. I don’t have a Glastron dealer around me. I bought boat used out of state.
Click to expand...
how long did it take you to remove the pump just want to budget my time and what tools anything special
 
Hey Kyle. Thanks for info. Only took 30 minutes. 4 hex screws need to be removed to take nozzle /Venturi loose. They were very tight. I had to go to Home Depot and buy hex wrenches with handles. Then you need 10 mm wrench and socket to get the little nuts off for reverse drive and some other thing I forget what it’s called. Then you need a 17 mm deep socket and a very long extended to get the 4 bolts off for pump all the way back in there. I have appointment with Glastron dealer to get my stripped shafts repalaced under warranty. But they are booked until mid July. There goes my summer
 
Stripped driveshaft
 

Attachments

  • 37F23798-A049-48FE-9B34-29213AC009A3.png
    37F23798-A049-48FE-9B34-29213AC009A3.png
    3.8 MB · Views: 44
Where the hell did you find the wear ring? Can't find it online.
 
Samson said:
Hey Kyle.

I have the GTS 207 with the supercharged 250 hp. I was on lake other day and lost all propulsion. Had to get towed. Boat runs with a loud whine and if I rev in fwd or reverse I get no movement. On trailer hooked to hose no loud whine. Back on water nothing. None of the seadoo dealerships will touch my boat even thought it’s same motor so I’m stuck making appt with glastron dealer 1 1/2 hours away who is booked up for 3 weeks. I too would like to know a seadoo model I could give to local seadoo dealer to see if they have wear ring in stock. I think that may be my problem. Do i have to buy from dealer one of those impeller removal tools also?
Click to expand...
I used a vice to hold housing, then two rubber coated handles on some tools . Wedge then in the impeller across from each other, and turn . Comes right off .
 
Kyle Mekulik said:
Ok guys got parts numbers for the 250hp Rotax single engine boat powered by BRP

Wear ring 0460160
Impeller 0460166
This supposedly only applies to 18-21ft boats
Click to expand...
Did you get those parts installed? I ordered new wear ring and it's turned into a total abortion. Wear ring goes in no problem. Impeller not so much. Got it in with a press with out messing the impeller up, and can't get impeller to thread onto bearing shaft . Seriously have no idea what to do, besides throw the old wear ring back on .
 
Man I did everything myself no problem at all... where did you get your wear ring from maybe it wasn’t machined right. The wear ring I got looked to be CNC machined HD was perfect tight fit
 
I'm starting to think my prop was fucked and the old wear ring conformed to it. Might cut my losses and just get the solas ring and impeller
 
Thanks!
 
You noted you got a 159wear ring .when I called solas, gave them my part number off my stock impeller, he told me it was a 161mm .
 
I bought 159mm and it fit perfect installed it myself. Grab a micrometer from harbor freight and measure yours always nice to be rite the first time
 
You must log in or register to reply here.

Similar threads

B
2016 Glastron GTS 187 Questions
Replies
0
Views
448
Bcollins111900
B
Guitarjesus
Will gouges in the inner wear ring cause cavitation?
Replies
2
Views
429
Guitarjesus
Guitarjesus
Faith Johnson
Yamaha Wear Ring
Replies
2
Views
302
Faith Johnson
Faith Johnson
W
Port vs Starboard Impeller
Replies
4
Views
419
Whickety
W
zibius
Sudden lack of thrust
Replies
3
Views
249
zibius
zibius
Back
Top