• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.

    Click Here for more information>Ride Steady group buy for JetBoaters.net members only

    You can dismiss this Notice by clicking the "X" in the upper right>>>>>

Aerator Issue

Dshriber

Jet Boat Addict
Messages
143
Reaction score
34
Points
107
Boat Make
Yamaha
Year
2020
Boat Model
FSH Sport
Boat Length
21
I had the dealer install a new aerator. It doesn't work, I checked the fuses by the batteries and they are good. Any other suggestions? Thanks! They did test at the dealer and was working after install.
 
I had the dealer install a new aerator. It doesn't work, I checked the fuses by the batteries and they are good. Any other suggestions? Thanks! They did test at the dealer and was working after install.
Did you check the circuit breaker next to the switch?
Does the switch light up?
 
I did push the round rubber breaker. The switch is not lighting up

thank you
 
I did push the round rubber breaker. The switch is not lighting up

thank you
Then you will have to use a multi meter and see if you have power to the line side of the circuit breaker and trace back from there. In the back of the service manual there are wiring diagrams….
 
good call. Thats next

Thanks!
 
Back
Top