• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.

    Click Here for more information>Ride Steady group buy for JetBoaters.net members only

    You can dismiss this Notice by clicking the "X" in the upper right>>>>>

2010 212x water pushing through hose hookup

csmacken

Jet Boat Lover
Messages
49
Reaction score
8
Points
77
Boat Make
Yamaha
Year
2009
Boat Model
X
Boat Length
21
Hopefully not a major issue but I noticed the other day that water was pushing through the water hose hookup while at mid to high range rpm’s (5-10k). It wasn’t a major leak, but enough the notice it was coming out.

Has anyone had the same issue?

Not sure if it’s related or not but when I hook up the flush hose adapter while on the trailer I can’t get the male end of the adapter to get a good seal with the female end in the boat. If I physically hold it in it doesn’t leak but leaving it on its own it leaks.

Any help appreciated!
 
My flush ports have a cap that screws on. Are you missing yours?
 
Yes they have caps on them. Seems to be pushing around the caps or possibly where it’s sealed to the fiberglass.
 
Back
Top