• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

2020 210 FSH Trailer Rebuild

Putting the trailer back under the boat was easier since i could use the winch on the boat.
View attachment 195500
It did provide some additional clearance for the fenders.
View attachment 195501
View attachment 195502
And there is a hair of clearance under the livewell pickup.
View attachment 195503
I havent had a chance to launch and recover the boat but will update the post when I can formulate an opinion on the slides.
What size wheels / tires are these? I just picked up a set of 205/75/15's, hoping they will fit? Has anyone had any luck with this on the 210 FSH trailer?
 
I tried the search but could not find anything. I am getting ready to replace my springs this weekend on my tandem trailer, my question is does the hook eye go on the trailer hanger or the equalizer? Currently the slip eye is on the trailer bracket side but I believe the springs were replaced by the PO and I am seeing a few pics with the slip eye on the equalizer. Just double checking before i do the replacement.
 
I tried the search but could not find anything. I am getting ready to replace my springs this weekend on my tandem trailer, my question is does the hook eye go on the trailer hanger or the equalizer? Currently the slip eye is on the trailer bracket side but I believe the springs were replaced by the PO and I am seeing a few pics with the slip eye on the equalizer. Just double checking before i do the replacement.
Front to back both springs with the slip eye in the rear. Front spring slip eye goes to the equalizer second spring slip eye goes to rear most bracket
 
IMG_2087.png
I just noticed that I didn’t get these with the kit. Talked to a local trailer place and they said they are not needed to just use the u bolts around the axle. Can anyone verify this would work without them?
 
View attachment 239922
I just noticed that I didn’t get these with the kit. Talked to a local trailer place and they said they are not needed to just use the u bolts around the axle. Can anyone verify this would work without them?
I would use them. It will distribute the load of the clamping force evenly. Clamping against the leaf isn't ideal
 
Back
Top