• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.

    Click Here for more information>Ride Steady group buy for JetBoaters.net members only

    You can dismiss this Notice by clicking the "X" in the upper right>>>>>

2023 AR190 subwoofer mounting

Edge540je

Well-Known Member
Messages
30
Reaction score
43
Points
57
Boat Make
Yamaha
Year
2023
Boat Model
AR
Boat Length
19
Hi
I have a 2023 AR190. I am mounting it cabinet opposite the helm. is the floor ok to screw into all the way around the sub in my picture below? The bottom of the boat is not close?

thanks in advance for your help.
 

Attachments

  • IMG_1949.jpeg
    IMG_1949.jpeg
    260.7 KB · Views: 49
  • IMG_1948.jpeg
    IMG_1948.jpeg
    251.1 KB · Views: 48
I mounted my subs in that location and didnt have any issues.
 
What subwoofer is that? Also are you getting rattling? I was thinking of assing a couple open air subs, but this box would keep me from opening holes.
 
No rattling. I made sure to not have the sub sides and back not touching any fiberglass.
Wetsounds AS-10
 
Back
Top