• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

Can someone show me some pictures of their trailer bunk locations?(AR195)

BrandonG

Jet Boat Addict
Messages
201
Reaction score
98
Points
117
Boat Make
Yamaha
Year
2019
Boat Model
AR
Boat Length
19
I have a 2019 AR195 with the standard single axle Shoreliner trailer. Whoever had the responsibility of placing the bunks on the trailer did certainly not put them in the optimal position as they are so narrow that its hard to get the boat to sit right on the trailer and the starboard bunk broke the speedo wheel off so I need to move them wider.

The bunk carpet is also wearing down so I'm going to replace the bunks, I dont particularly want to use carpet and am thinking the rubberized covering may be the ticket allthough I would not love it if it left black streaks on the bottom of the boat. Anyone have any suggestions about bunk coverings?
 
I have one at the Shop. I will try to get some pictures posted up for you later this afternoon
 
Still interested in anyone that can help...I got some new bunks and tried a few different spots and have not found the ideal spot to mount the bunks. The rear of the boat doesn't sit correctly on the trailer. I saw this was a problem from the factory since they changed the hull for 2019 boats but there arent any pictures I've found that are easy to decipher how the brackets are mounted on the new ones.
 
I am having similar trouble with my 2021 195fsh. It leans to the port side when I load it on the trailer sometimes. They say to leave the live well filled to offset the weight of the batteries, but I tend to forget this and drain the live well. I, too, have considered adjusting the bunks but dont want to make it worse. I will try to photograph mine next time I launch and post up. Thanks.
 
I scoured youtube for an hour trying to catch a glimpse of the trailer bracket mounting on the 2020+ boats and believe I see where the everything is supposed to line up..

I found this video most helpful..

I am going to place mine in the same spots this weekend and see how it goes but I know mine are too far apart currently as the boat sits too deep into the trailer and hits the plastic wheel wells.
 
Back
Top