• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.

    Click Here for more information>Ride Steady group buy for JetBoaters.net members only

    You can dismiss this Notice by clicking the "X" in the upper right>>>>>

Drive Control Profiles

granpachuck

Jetboaters Lieutenant
Messages
327
Reaction score
255
Points
167
Location
Cary NC
Boat Make
Yamaha
Year
2016
Boat Model
242 Limited S E-Series
Boat Length
24
Hi Everyone,

I bought a 2016 242 LS E Series from a neighbor, and I cant find any documentation on how to delete rider profiles . Previous owner has several riders listed, with their preferred set ups, and now we are doing some wakeboarding. I would like to be able to remove these profiles and start from a blank slate.

Anyone done this ? Thanks.
 
I would just select the profile and edit it and then resave over that profile. I think once you have the settings that you want set, just touch and hold the profile and it will prompt to save. I can confirm this evening.
 
Ok, I feel like I may have tried that last week, but probably did it wrong. I will give it another go this week, thanks.
 
on my 2018 the drive profiles are a bit buggy. Sometimes it takes sometimes it doesn't. Just try editing again and it should work... eventually
 
Back
Top