• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.

    Click Here for more information>Ride Steady group buy for JetBoaters.net members only

    You can dismiss this Notice by clicking the "X" in the upper right>>>>>

Fuse and Radio Amp Issue 242X

ToddW850

Jetboaters Admiral
Messages
1,619
Reaction score
1,507
Points
287
Location
Destin, Florida
Boat Make
Yamaha
Year
2017
Boat Model
242X E-Series
Boat Length
24
2017 Yamaha 242X E -Series

Blew a fuse for the Solar Panel. Before I tracked down the fuse , I noticed only the front 2 bow speakers were working and only 1 Polk Amp has power. Replaced the Solar Panel fuse and all the speakers are working now except the swim platform and the ones attached to the tower.

Amp still not coming on. I checked the fuses on the side of the amp and they are good. Any ideas what to check next?

20200515_174951.jpg20200515_145246.jpg20200515_145213.jpg
 
Check the remote wire for the amp. Could be a loose connection.
 
Check the remote wire for the amp. Could be a loose connection.

Thanks. I touched and moved the wires, but I will go back and check them better.
 
Did you find out what was causing this? Same issue, top Polk amp shows no power and tower canon speakers not working. Everything else seems to work. Thx.
 
Back
Top