• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.

    Click Here for more information>Ride Steady group buy for JetBoaters.net members only

    You can dismiss this Notice by clicking the "X" in the upper right>>>>>

Hi group, I need advise for replacement Bimini top for 2008 212x and transom Sony radio module

Fourjets

Jet Boat Junkie
Messages
80
Reaction score
25
Points
142
Location
wilmington N.C. 28412
Boat Make
Yamaha
Year
2016
Boat Model
Other
Boat Length
PWC
I need a new Bimini for the boat. Anyone have one for sale or where I can have one made?
also need the Sony transom module replaced.
starboard reverse gate is very stiff, any Suggestions? I will likely replace the cable but is there somewhere to lubricant the cable?other than right in front of the bucket. I assume there is corrosion throughout the cable.
thanks in advance for any advise from the group. happy Turkeyday!
 
Last edited:
For the bimini I would just have a local upholstery shop make you a new one. For the gate I would disconnect the cable at the gate to see if it's the cable that needs replaced or if the gate mechanism possibly got bent and replace parts as needed.
 
I second the local upholstery shop. I simply unscrewed the pole(s) to thread it off and they made a new one directly from that “pattern”. The Sunbrella looks way better than the original.
 
Back
Top