• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

intermediate bearing replacement info.

I’ve got another idea as part of my troubleshooting. I’m thinking about pulling and swapping the pump assemblies to see if the noise moves with the pump assemblies or stays with the IDS assembly. Are there any differences between port and starboard pump assemblies?
No difference between the pumps. It is only on the nozzle part that they are different with the pressure wash fitting plugged up on the port side (left) pump. I have used the same method to track down where i thought noises were coming from. cobra SM w Fang install May 2022 .jpg5CB1C09A-E992-4B48-8E8F-DD28F50BF7F7.jpeg
 
Last edited:
Back
Top