-
Welcome to Jetboaters.net!
We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!
Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)
-
Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.
Click Here for more information>Ride Steady group buy for JetBoaters.net members only
You can dismiss this Notice by clicking the "X" in the upper right>>>>>
Is there a side scan transducer
- Thread starter Fezzik
- Start date
lazergeek
Jetboaters Commander
- Messages
- 752
- Reaction score
- 824
- Points
- 187
- Location
- South Florida
- Boat Make
- Yamaha
- Year
- 2021
- Boat Model
- FSH Sport
- Boat Length
- 21
Side scan doesn't work with thru hull. you will have to mount to the ride plate or transom. Get a Simrad or Lowrance
https://www.googleadservices.com/pa...=2ahUKEwjijpas38X-AhVFfTABHY4DC2wQ0Qx6BAgEEAE
3in1 Transducer. Im not sure if the head unit works with dual inputs, if not just disconnect the factory installed on and connect the new one. You will also need to switch the type in the settings.
https://www.googleadservices.com/pa...=2ahUKEwjijpas38X-AhVFfTABHY4DC2wQ0Qx6BAgEEAE
3in1 Transducer. Im not sure if the head unit works with dual inputs, if not just disconnect the factory installed on and connect the new one. You will also need to switch the type in the settings.
Fezzik
Active Member
- Messages
- 12
- Reaction score
- 4
- Points
- 42
- Boat Make
- Yamaha
- Year
- 2021
- Boat Model
- FSH
- Boat Length
- 25
Ok. That's good to know. Is there a way to keep the front downscan and add the new transducer on the transom for the sidescan and have both be running on the one simrad? I do like keeping the downscan on the bow area
lazergeek
Jetboaters Commander
- Messages
- 752
- Reaction score
- 824
- Points
- 187
- Location
- South Florida
- Boat Make
- Yamaha
- Year
- 2021
- Boat Model
- FSH Sport
- Boat Length
- 21
It looks like the Go12 does not support dual transducers. The NSS Evo3 or 3S series does however.
lazergeek
Jetboaters Commander
- Messages
- 752
- Reaction score
- 824
- Points
- 187
- Location
- South Florida
- Boat Make
- Yamaha
- Year
- 2021
- Boat Model
- FSH Sport
- Boat Length
- 21
My go9 doesnt have dual ports for the transducer, Go12 is basically the excact same, just larger screen.
FSH 210 Sport
Jetboaters Fleet Admiral
- Messages
- 7,690
- Reaction score
- 9,603
- Points
- 532
- Location
- Tranquility Base
- Boat Make
- Yamaha
- Year
- 2020
- Boat Model
- FSH Sport
- Boat Length
- 21
I know nothing more than a search I just did for the Simrad GO 12, but I found the link below. It appears that if you use their three in one transom mounted transducer the GO 12 will do side scan. Again, first time I’ve ever really looked into the Simrad unit.
www.simrad-yachting.com
My suggestion would be to get the serial number off of your unit and contact their customer support and see what the unit you have is capable of. Do you even see a screen in your unit for side scan?
GO12 XSE with Active Imaging 3-in-1 Transducer | Simrad Marine Electronics
12-inch display with Active Imaging™ transducer and radar support.
www.simrad-yachting.com
My suggestion would be to get the serial number off of your unit and contact their customer support and see what the unit you have is capable of. Do you even see a screen in your unit for side scan?
FSH 210 Sport
Jetboaters Fleet Admiral
- Messages
- 7,690
- Reaction score
- 9,603
- Points
- 532
- Location
- Tranquility Base
- Boat Make
- Yamaha
- Year
- 2020
- Boat Model
- FSH Sport
- Boat Length
- 21
lazergeek
Jetboaters Commander
- Messages
- 752
- Reaction score
- 824
- Points
- 187
- Location
- South Florida
- Boat Make
- Yamaha
- Year
- 2021
- Boat Model
- FSH Sport
- Boat Length
- 21
My Go9 came with the side scan, It will defiantly work on your Go12 unless Yamaha removed functionality but Im pretty sure I saw somewhere someone already added the 3 in 1 instead without an issue. Side scan works great but I dont use as much as Downscan. Yamaha just puts in the down scan only because they can do thruhull without haveing to deal with warranty issues for broken transducer on the transom.
Similar threads
