-
Welcome to Jetboaters.net!
We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!
Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)
Issus with imprella
- Thread starter Daniel E
- Start date
Jet Boat Tom
Jet Boat Addict
- Messages
- 62
- Reaction score
- 47
- Points
- 107
- Location
- Northern Michigan
- Boat Make
- Glastron
- Year
- 2014
- Boat Model
- GT
- Boat Length
- 20
If you took the nuts off get a good grip on it and pull it straight out. Fyi no need to pull the nose cone off to remove pump.
Sidarousmg
Jetboaters Lieutenant
- Messages
- 150
- Reaction score
- 137
- Points
- 152
- Location
- Mechanicsville, VA
- Boat Make
- SeaDoo
- Year
- 2010
- Boat Model
- Challenger
- Boat Length
- 21
looks just like my seadoo challenger. the drive shaft is mated to this part via splines. are you removing because something got sucked up? if so, look from under the grate and see if something there, maybe something is providing additional resistance??
Winerocks
Jet Boat Addict
- Messages
- 191
- Reaction score
- 137
- Points
- 112
- Location
- Bloomington, Indiana
- Boat Make
- Scarab
- Year
- 2015
- Boat Model
- HO Impulse
- Boat Length
- 21
Tap on the housing very gently with a rubber mallet to break the seal.
Similar threads
