-
Welcome to Jetboaters.net!
We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!
Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)
Manhole cover spring
- Thread starter Dan Ruehl
- Start date
Babin Farms
Jetboaters Fleet Admiral
- Messages
- 4,040
- Reaction score
- 13,407
- Points
- 537
- Location
- Lower Alabama
- Boat Make
- Yamaha
- Year
- 2009
- Boat Model
- AR
- Boat Length
- 23
I’d check the local mom-n-pop hardware store. They usually have what you’ll need.
drewkaree
Jetboaters Fleet Admiral 1*
- Messages
- 7,923
- Reaction score
- 29,303
- Points
- 822
- Location
- Central WI
- Boat Make
- Yamaha
- Year
- 2019
- Boat Model
- AR
- Boat Length
- 21
McMaster-Carr or possibly Grainger online should have something as well.
Looking online, that's one of those $2 parts that they won't sell individually, because you NEED it, and they just so happen to have it in a $2657eleventybrazillion "assembly" that "can't be parted out".
Count the coils, dial calipers for the thickness of the wire, measure the diameter and the height, and you should be able to find something on either online place if you can't/don't find something local. That's WAY overkill, but likely you'll need at least some of those measurements to track down something identical online. Local will be cheaper and easier fo sho.
Looking online, that's one of those $2 parts that they won't sell individually, because you NEED it, and they just so happen to have it in a $2657eleventybrazillion "assembly" that "can't be parted out".
Count the coils, dial calipers for the thickness of the wire, measure the diameter and the height, and you should be able to find something on either online place if you can't/don't find something local. That's WAY overkill, but likely you'll need at least some of those measurements to track down something identical online. Local will be cheaper and easier fo sho.
