OK, it seems like this should be easy, but.....

[vikingknut]

On my AR250 (2023), how do you remove the battery switch cover for the house battery to install a new electronic device (amp)? I thought it should be easy, but I am missing something (and it was getting too dark to look further).

 

[Adrian @ JB Solutions]

Should be screws holding the entire thing in.

 

[Weeb]

The DVSR is bolted. There is nuts on the other side. It took me a bit to figure this out.

 

[vikingknut]

Mine is screws. Perhaps they are saving money where they can.

 

[Weeb]

In order to add something you have to take the whole unit off which should be bolts.

 

[Weeb]

The bolts have Phillips heads also

 

[vikingknut]

What year is your boat? I removed it, added my amp's positive connection and put it back. However, it was definitely just screws and not bolts with nuts.

 

[lazergeek]

You have to remove all the screws, it comes off as a single piece. I recommend adding a buss bar in the battery compartment so you don't have to remove every time you add something

 

[Weeb]

What year is your boat? I removed it, added my amp's positive connection and put it back. However, it was definitely just screws and not bolts with nuts.

I have a 2017 ar240. I assumed they used the same dvsr in all the boats. But you know what happens when you assume. ?